Quasar CM-6208 User and Installation Guide
4
3.3
Internal Connectors
As seen in the illustration below, the baseplate of the camera includes a microSDXC card drive,
which can store up to 128GB of data. The base of the lens assembly includes a reset button.
Figure 4: MicroSDXC Card Drive and Reset Button
To perform a hard reset to full factory defaults using the Reset button
1.
Insert a pointed object into the Reset button.
2.
Press the button for 30 seconds. Both LEDs on the RJ45 connector are extinguished. After
one second, the green network LED flashes once and then remains lighted. The yellow
activity LED flashes as soon as it detects network activity.
3.
The unit returns to full factory defaults.
3.4
System Cable Connectors
The camera is shipped with a system cable for network, power, I/O, and audio connections. The
figure below shows the various connectors included in the system cable of the CM-6208-11-I
camera. The connectors, pin numbers and signal definitions are listed below.
Figure 5: CM-6208 Camera Input/Output Connections