Quark-elec Manual
https://www.quark-elec.com
4 of 30
2018
V2
2. Introduction
The G022P series remote controller is a versatile device which can be connected to many electronic devices in
homes, offices, factories or wherever required. The standard G022P includes two digital alarm inputs, three
independent relay switches.
It allows operators to control and monitor remote equipment or machines using SMS (Short Message Service) via
the GSM network. Up to 4 mobile phone numbers (SIM card numbers) can be linked to each G022P remote
controller (1 main control terminal, and up to 3 additional control terminals). These mobile phones can belong to
technicians, engineers or individuals who have a requirement to control and/or monitor corresponding devices.
The G022P includes:
Two digital alarm inputs connections
: for connection to various inputs to be monitored (an alarm SMS can
be received when either alarm input is triggered. The alarm input can also be set to trigger automated control of the
machinery connected to the Relay outputs 1 and/or 2)
Three relays output connections:
for connection to the machinery to be controlled (two with daily timers
and automated control options manual options and one with manual SMS function)
Android and iOS APP:
the device can be controlled by either SMS text message codes or an APP for
Android and iOS (iPhone) phones. This is a touch sensitive, user friendly interface.
Four control mobile phones - one main control terminal and up to 3 additional control terminals can be registered
with G021/22.
Figure 1: System diagram
Three specialized modules available:
G021/22
includes the main controller unit
G022G
includes G022 plus a GPS receiver allowing you to track the location of the unit
G022P
includes G022 plus a wireless passive infrared (PIR) motion detector as an additional alarm input
G033
is a 3G version of our G021/22 main controller unit.
