Quark-elec Manual
https://www.quark-elec.com
13 of 30
2018
V2
10.4. Delay time setting on latching mode
Working in latching mode, operators can configure G022P with different delay times for Relay 1 and Relay 2 by
setting the delay time jumpers.
Figure 9: Delay time settings for relays
Hardware versions, G022P
provide SMS commands in „
ONOFFRnxxx#
‟ format to support other delay times (from
001 second to 999 seconds).
„n‟ indicates the relay number (1 or 2)
„xxx‟ means the delay times (from 001 to 999 seconds)
More details about this command can be found at chapter 10.
Delay time set as:12 seconds
Delay time set as:9 seconds
Delay time set as:6 seconds
Delay time set as: 3 seconds
Delay time settings for Relay 1
and Relay 2
