Chapter 4: Operations
Status Lights
QuantumLTO-8 HH SAS User’s Guide
39
Off
Flashing
(once
per
second)
Off
Displaying
error code
Off
An error occurred and the drive or
media may require service, or it may
require cleaning. Note the code on
the SCD, then go to
determine the action that is
required.
Off
Flashing
Off
Displaying
C
Off
The drive needs cleaning.
Off
Flashing
Off
Displaying
Function
Code 2 or
Flashing
Off
The drive is updating firmware
1
. The
SCD will display a 2 if using an FUP
cartridge. The SCD will be off if using
the host interface. For more
information, see
Off
Flashing
(twice
per
second)
Off
Off
Off
The drive detected an error and is
performing a firmware recovery. It
will reset automatically.
Off
On
Off
Flashing C
Off
The drive is requesting a cartridge to
be loaded.
Off
Flashing
(twice
per
second)
Off
Off
On
There is a drive dump in flash
memory.
1
Power should not be removed from the drive until the microcode update is complete. The drive
indicates that the update is complete by resetting and performing POST.
If green
Ready
Status
Light is
and
amber
Fault
Status
Light is
and
Encryption
Status
Light is
and SCD is
and
SCD Dot
is
Meaning
Summary of Contents for LTO-8 HH SAS
