![background image](http://html1.mh-extra.com/html/quantum/lto-8-hh-sas/lto-8-hh-sas_technical-reference-manual_3839997045.webp)
Chapter 4: Operations
Status Lights
QuantumLTO-8 HH SAS User’s Guide
37
Flashing
(once per
second)
Off
On/Off
Off
Off
The drive is reading from the tape,
writing to the tape, rewinding the
tape, locating data on the tape,
loading the tape, or unloading the
tape.
Note:
The white Encryption status
light is on when all the data
on the cartridge is encrypted
(excluding the label). LTO
Ultrium 8, Ultrium 7, Ultrium
6, and Ultrium 5 cartridges
only.
Flashing
(once per
second)
Off
Off
Off
Off
If the drive contains a cartridge
during the power-on cycle, the drive
completes POST and slowly rewinds
the tape (the process may take up to
ten minutes). The light stops
blinking and becomes solid when
the drive completes the recovery and
ejects the cartridge.
Off
On
Off
Displaying
an error
code or
Maint
Mode
Function
On/Off
The drive is displaying error code(s)
from the error code log on the SCD.
For more information, see
Code 9: Display Error Code Log
page 57 and
.
If green
Ready
Status
Light is
and
amber
Fault
Status
Light is
and
Encryption
Status
Light is
and SCD is
and
SCD Dot
is
Meaning
Summary of Contents for LTO-8 HH SAS
