- 5 -
1. LOCATION OF THE DEVICE
The thermostats of the
COMPUTHERM
Q8RF (TX)
multi-zone programmable wireless type
device can be freely moved in your residence. It is reasonable to locate them in rooms used
regularly or for many hours per day so that they are in the direction of natural ventilation in the
room but protected from drought or extreme heat (e.g. direct sunlight, refrigerator, chimney,
etc). Do not use in wet, chemically aggressive or dusty environment. Their optimal location is
0.75 - 1.5 m above floor level. They can be placed on their own stand or can be mounted
on a wall.
IMPORTANT WARNING!
If the radiator valves in your flat are equipped with a thermostatic
head, adjust it to maximum temperature or replace the thermostatic head of the radiator
valve with a manual control knob in the room where the room thermostat is to be located,
otherwise the thermostatic head may disturb the temperature control of the flat.
2. PUTTING THE THERMOSTAT INTO OPERATION, BASIC
SETTINGS
Warning!
The device must be installed and connected by a qualified professional.
2.1 Inserting batteries
Pressing the lock on the upper side of the housing of the thermostat, remove the back
cover of the thermostat as shown in the figure below.
