- 16 -
. This way the programming of the selected day(s) is finished, the thermostat
offers another day to be programmed and the programming can be continued from
step “
c
”.
If all the switches (
PROG
‒
PROG
) are activated for the selected day(s), then after
setting the temperature value of
PROG
, the programming of the selected day(s) is
finished, the thermostat offers another day to be programmed and the programming
can be continued from step “
c
”.
h.
The adjusted program can be saved by pressing the
“
SET
”
button.
After
approximately 1 minute, the adjusted program is automatically saved. Afterwards, the
device goes back to the main screen.
If you wish to copy the program of the day(s) selected in step “
c
” to other days, you can
easily do so using the “
COPY
” button as described in
Section
4.4.
4.4 Using the
“
COPY” function (Copying the program of a day to other days)
• 1st, press the “
SET
” button to go to the main screen. Then press the
“
COPY
”
button for approximately 3 seconds to activate the “
COPY
” function. The notice
“
” appearing in place of the time characters and the flashing abbreviation
MON
indicating Monday shows that conditions are ready for copying a program.
• Select the day whose program you wish to copy to another day or other days using
the large
and
buttons on the front panel of the device.
