- 19 -
• Repeatedly press the “
PROG
” button to check the values of switch
PROG
,
PROG
, etc. Use the large
and
buttons to change the day(s). If all the days
were programmed together (
MON TUE WED THU FRI SAT SUN
), then their common
program can only be viewed together.
• After checking the program, press the “
SET
” button to go back to the main screen (if
no buttons are pressed for at least 15 seconds, the thermostat will automatically go
back to the main screen).
5. TEMPORARY MODIFICATION OF THE TEMPERATURE
CORRESPONDING TO THE PROGRAM
If you wish to operate your device in a way that differs temporarily from the program that
has been set (e.g. on bank holidays or the winter holidays), you can choose among the
options described in
Sections
5.1- 5.4
.
To simplify manual temperature modifications, with factory default settings temperatures
of
°C and
°C are assigned to the large
and
buttons, respectively. When
modifying the temperature manually, pressing the
and
button once, the
temperature will immediately jump to the factory value of the button. For example, if the
current switch
PROG
ensures a temperature of
°C, it can be modified to a standard
temperature that ensures
°C when needed by pressing the
button only once,
without having to press the
button several times in increments of 0.5 °C. Following
this, using the large
and
buttons, the temperature can be further modified in
increments of 0.5 °C, in accordance with current requirements.
