- 13 -
are flashing on the display. The modification of these values can always be done
using the large
and
buttons.
The confirmation of a value is always
done by pressing the “
PROG
” button, after which the next value can be adjusted. The
program can be saved by pressing the “
SET
” button. A more detailed description of the
programming steps can be found in Section
4.3
.
• If there are days, for which the same program is needed, than it is sufficient to create that
program only once, since it can be easily copied to another day using the “
COPY
” button
as described in Section
4.4.
If the same program is needed for every day, then there is
also a possibility to create the program of all the days together (by selecting
MON TUE
WED THU FRI SAT SUN
together during the selection of days). But be aware: if the
program of all the days are created together, than their program can only be modified
together. Therefore, if a different program is needed for at least one day, then the program
of the days should be created separately, and the repeated programs should be copied
using the “
COPY
” button.
• A separate program can be created for the heating and cooling mode, and these
programs are preserved when switching between the modes. Therefore, if the thermostat
is used for both heating and cooling, then there is no need to modify the program of the
thermostat every time a switch between these modes is performed.
4.2 Recommendations for creating a heating program
The average comfort needs of a person can usually be satisfied by a temperature of 19-
21 °C during the night, and a temperature of 22-23 °C during the day. During that time
