- 14 -
of the day, when the family is at work or school, only a lower temperature is needed. As
heating up and cooling down usually takes a long time, it is reasonable to set the start
time of the switches 0.5-1 hour before the desired time of the modified temperature. The
programmability of the thermostat provides a perfect solution for this.
For an average working family, a program similar to the one below is recommended:
4.3 Programming steps
a. Press the “
SET
” button to go to the main screen.
b. Press the “
SET
” button again and hold it down and press the “
PROG
” button, too. At
this point the device gets into programming mode and the abbreviations indicating the
days of the week (
MON
TUE WED THU FRI SAT SUN
) are flashing on the display.
c.
Select the day to be programmed
using the large
and
buttons on the
front panel of the device (
MON
indicating Monday,
TUE
indicating Tuesday etc.). If
you wish to create the same program for each day of the week, it is reasonable to
