- 17 -
• Press the “
COPY
” button to copy the program of the selected day. After this, the
flashing of the abbreviation indicating the day that has been copied stops and it will
be visible continuously hereafter.
• Select the day to which you wish to copy the program of the day copied beforehand
using the large
and
buttons. The abbreviation of the active day is flashing
during this selection process.
• After selecting the abbreviation that indicates the day to which you wish to copy the
program, press the “
COPY
” button to copy the program. Hereafter, the abbreviation
indicating the day to which the program was copied will be visible continuously.
Following this, you can select further days using the large
and
buttons
and copy the program to those days too by pressing the “
COPY
” button.
• Finally, press the “
SET
” button to save the modifications (if no buttons are pressed
for at least 15 seconds, the modifications will be automatically saved). Afterwards, the
device goes back to the main screen. If required, the program of further days can be
freely copied by repeating the above steps.
ATTENTION!
The
“
COPY
” function is only available, if the days of the week were
programmed separately!
4.5 Modifying the program
• The previously set program can be modified any time by repeating the steps of
programming.
