Quantel Medical Optimus II, Service Manual

Page: 6 / 67

SERVICE MANUAL
Rev. 05/2005
P - 6
Page
7- ELECTRONIC ADJUSTMENTS P - 45
7-1 Energy safety P - 46
7-2 Energymeter calibration P - 46
7-3 High voltage calibration P - 47
7-4 Display contrast adjustment P - 49
8- OPTICAL ADJUSTMENTS P - 51
8-1 Checking after installation P - 52
8-1-1 Slit checking P - 52
8-1-2 Aiming beam checking P - 52
8-1-3 YAG and aiming beam checking P - 52
8-1-4 Focus checking P - 52
8-1-5 Laser mode checking P - 53
8-1-6 Energy checking P - 53
8-2 Aiming beam adjustments P - 54
8-2-1 Aiming beam
(and cross if available)
centring in the slit P - 54
8-2-2 Aiming beam focalized and sharp P - 55
8-2-3 Aiming beam centring in the binocular cross P - 56
8-2-4 Aiming beam not superposed on the YAG beam P - 57
8-2-5 Pin hole adjustment P - 58
8-2-6 Focus adjustment of the aiming beam P - 59
8-3 YAG adjustment P - 60
9- ROOM DOORSWITCH P - 63
9-1 Room doorswitch P - 64
9-2 Room doorswitch with 532 YAG adaptor P - 64
10- FUSES REPLACEMENT P - 66
VALIDATION - VAL -
TABLE OF CONTENTS