QUANTA STRATOS S200 Series S200-X12TS, Technical Manual

Page: 172 / 245

BMC C
ONFIGURATION
G
ROUP
4-22
To open DNS Server Settings page, click
Configuration > DNS
from the main menu. A sample screenshot of DNS Server Set-
tings Page is shown in the screenshot below.
DNS Server Settings Page
The fields of DNS Server Settings page are explained below.
DNS Server Settings Page
I
TEM
D
ESCRIPTION
Host configuration
Host Settings Choose either Automatic or Manual settings.
Host Name
It displays hostname of the device. If the Host
setting is chosen as Manual, then specify the
hostname of the device.
Register BMC
Register BMC To enable/disable Register BMC.
Domain Name Configuration
Domain Settings
It lists the option for domain interface as Manual,
v4 or v6 for multiLAN channels.
Note:
If you choose DHCP, then select v4 or v6 for
DHCP servers.
Domain Name
It displays the domain name of the device. If the
Domain setting is chosen as Manual, then spec-
ify the domain name of the device. If you chose
Automatic, the Domain Name cannot be config-
ured as it will be done automatically. The field
will be disabled.
Domain Name Server Configuration
DNS Server Settings:
It lists the option for DNS settings for the device,
Manual and available LAN interfaces. If you
choose Manual setting, you have to configure
the DNS Server IP addresses. If you have cho-
sen DHCP, then you have to select the interface
from which the IP address is to be received.
IP Priority
If IP Priority is IPv4, it will have 2 IPv4 DNS serv-
ers and 1 IPv6 DNS server. If IP Priority is IPv6,
it will have 2 IPv6 DNS servers and 1 IPv4 DNS
server.
Note:
It is not applicable for Manual configuration.
DNS Server Settings Page (Continued)
I
TEM
D
ESCRIPTION