QUANTA STRATOS S200 Series S200-X12TS, Technical Manual

Page: 184 / 245

BMC C
ONFIGURATION
G
ROUP
4-34
Procedure:
1. In the Alert Policy Tab, select the slot for which you have
to configure the Alert policy. That is, In the
Event Filter
Entry Page
, if you have chosen Alert Policy number as 4,
you have to configure the 4th slot (the slot with Policy
Number 4) in the Alert Policy Tab.
PEF Management - Alert Policy
I
TEM
D
ESCRIPTION
Policy Entry #
Displays Policy entry number for the newly con-
figured entry (read-only).
Policy Number Displays the Policy number of the configuration.
Policy Configuration To enable or disable the policy settings.
Policy Set
To choose any one of the Policy set values from
the list.

0: Always send alert to this destination.

1: If alert to previous destination was suc-
cessful, do not send alert to this destination.
Proceed to ESMS Functional Specification
For SI v0.11 next entry in this policy set.

2: If alert to previous destination was suc-
cessful, do not send alert to this destination.
Do not process any more entries in this policy
set.

3: If alert to previous destination was suc-
cessful, do not send alert to this destination.
Proceed to next entry in this policy set that is
to a different channel.

4: If alert to previous destination was suc-
cessful, do not send alert to this destination.
Proceed to next entry in this policy set that is
to a different destination type.
Channel Number
To choose a particular channel from the avail-
able channel list.
Destination Selector
To choose a particular destination from the con-
figured destination list.
Note:
LAN Destination has to be configured - under
Configuration > PEF > LAN Destina-
tion
.
Add
To save the new alert policy and return to Alert
Policy list.
Modify To modify the existing entries.
Cancel
To cancel the modification and return to Alert
Policy list.
PEF Management - Alert Policy (Continued)
I
TEM
D
ESCRIPTION