QUANTA STRATOS S200 Series S200-X12TS, Technical Manual

Page: 183 / 245

BMC C
ONFIGURATION
G
ROUP
4-33

Event Data 1 Compare 1 & Event Data 1 Compare 2
field is used to indicate whether each bit position's com-
parison is an exact comparison or not.
8. In the Event Data 2 configuration section,

Event Data 2 AND Mask field is similar to Event Data 1
AND Mask.

Event Data 2 Compare 1 & Event Data 2 Compare 2
fields are similar to Event Data 1 Compare 1 and Event
Data 1 Compare 2 respectively.
9. In the Event Data 3 configuration section,

Event Data 3 AND Mask field is similar to Event Data 1
AND Mask.

Event Data 3 Compare 1 & Event Data 3 Compare 2
fields are similar to Event Data 1 Compare 1 and Event
Data 1 Compare 2 respectively.
10.Click
Modify
to accept the modification and return to
Event filter list.
11.Click
Reset
to reset the modification done.
12.Click on Cancel to cancel the modification and return to
Event filter list.
13.In the Event filter list, click
Modify
to modify the existing
filter.
14.In the Event filter list, click
Delete
to delete the existing fil-
ter.
Alert Policy Tab
This page is used to configure the Alert Policy and LAN destina-
tion. You can add, delete or modify an entry in this page.
PEF Management – Alert Policy
The fields of the PEF Management – Alert Policy Tab are
explained below.
Note:
Value ranges from 0 to 255.
Note:
Value ranges from 0 to 255.