QUANTA STRATOS S200 Series S200-X12TS, Technical Manual

Page: 210 / 245

BMC M
AINTENANCE
G
ROUP
4-60
To open Firmware Update page, click
Maintenance > BMC
Firmware Update
from the main menu. A sample screenshot
of Firmware Update Page is shown in the screenshot below.
BMC Firmware Update Page
Procedure:
Click
Enter Update Mode
to upgrade the current device firm-
ware. As below step by step:
1. Closing all active client requests.
2. Preparing device for firmware upgrade.
3. Uploading firmware image.
4. Verifying firmware image.
5. Flashing firmware image.
6. Resetting Device.
Upload SignImage Key button Check this button to upload the
signimage public key of the encrypted firmware. It is used when
image key is changed.
Enter Preserve Configuration button Click this to redirect to Pre-
serve configuration page. Please check “Preserve Configura-
tion”.
Note:
The firmware upgrade process is a crucial operation. Make sure
that the chances of a power or connectivity loss are minimal
when performing this operation.
Once you enter into Update Mode and choose to cancel the
firmware flash operation, the MegaRAC
®
card must be reset.
This means that you must close the Internet browser and log
back onto the MegaRAC
®
card before you can perform any
other types of operations.
Note:
You can now follow the instructions presented in the subse-
quent pages to successfully update the card’s firmware. The
device will reset if update is canceled. The device will also reset
upon successful completion of firmware update.