QUANTA STRATOS S200 Series S200-X12TS, Technical Manual

Page: 152 / 245

BMC F
RONT
P
ANEL
U
SER
I
NTERFACE
4-2
Power Button
As previous described, the Power buttons provide one of the
sources for system status control.
ID Button
The control panel Chassis Identify button toggles the state of
the Chassis ID LED. If the ID LED is off, then a button press will
turn the LED on (blinking). If the LED is on, a button press or
IPMI Chassis Identify command will turn the LED off.
LEDs
The following table contains information on Status, ID and
Heartbeat LED's
The following table contains information on Status LED when
amber blinking.
Status LED Activity
N
O
.
S
TATUS
LED
A
CTIVITY
D
ESCRIPTION
1
Temperature
Sensor
Non-critical / critical event asserted
2 Fan Sensors Non-critical / critical event asserted
3
Voltage Sen-
sors
Critical event asserted
4 Power Supply State asserted
5 Processor Thermal trip
6
Event Log-
ging Disable

SEL almost full

SEL full
7 Post Error System firmware error
8 Memory

Correctable EEC error

Uncorrectable ECC error

Correctable ECC error logging limit reached
9 PCI-E Bus

Bus correctable error

Bus uncorrectable error

Bus fatal error
10 Watchdog 2

Timer expired

Hard Reset

Power Down

Power cycle
Status LED Activity (Continued)
N
O
.
S
TATUS
LED
A
CTIVITY
D
ESCRIPTION