Quanta Computer QuantaMesh, User Manual

Page: 669 / 1020

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 669
6.2.2.3 ip address
This command configures an IP address on an interface. The IP address may be a secondary IP
address.
Syntax
ip address <ipaddr> <subnet-mask> [secondary]
no ip address <ipaddr> <subnet-mask> [secondary]
<ipaddr> - IP address of the interface.
<subnet-mask> - Subnet mask of the interface.
[secondary] - It is a secondary IP address.
no - Delete an IP address from an interface.
Default Setting
None
Command Mode
Interface Config
6.2.2.4 ip address dhcp
This command enables the DHCPv4 client on an in-band interface so that it can acquire network
information, such as the IP address, subnet mask, and default gateway, from a network DHCP server.
When DHCP is enabled on the interface, the system automatically deletes all manually configured IPv4
addresses on the interface.
Syntax
ip address dhcp [restart]
no ip address <ipaddr> <subnet-mask> [secondary]
[secondary] - To restart IP Address given by DHCP server.
no - This command releases a leased address and disables DHCPv4 on an interface.
Default Setting
Disabled
Command Mode
Interface Config