Quanta Computer QuantaMesh, User Manual

Page: 788 / 1020

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 788
6.11.1.7 show ip bgp neighbors
This command displays information about Border Gateway Protocol (BGP) and TCP connections to
neighbors.
Syntax
show ip bgp neighbors [<ip-address> [advertised-routes | policy | received-routes | rejected-routes |
routes] | policy]
ip-address - Displays information about the IPv4 neighbor. If this argument is omitted, information
about all neighbors is displayed.
policy - Display inbound and outbound policies for all neighbors or the specified neighbor.
advertised-routes - Display routes advertised to a neighbor.
received-routes - Display routes received from a neighbor.
rejected-routes - Display routes rejected by inbound policy.
routes - Display routes accepted by inbound policy.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Remote Address: The IP Address of the Peer's BGP interface.
Remote AS: Autonomous system number of the neighbor.
Peer ID: Router ID of the neighbor.
Peer Admin Status: States whether BGP is enabled or disabled of the neighbor.
Peer State: Finite state machine (FSM) stage of session negotiation.
Local Port: The port number of the local port.
Remote Port: The port number of the remote port.
Connection Retry Interval: Time interval, in seconds, at which the device resend messages to this
neighbor.
Neighbor Capabilities: BGP capabilities advertised and received from this neighbor.
IPv4 Unicast Support: Support IPv4 unicast packets or not. The valid value will be Both, Sent,
Received or None.
IPv6 Unicast Support: Support IPv6 unicast packets or not. The valid value will be Both, Sent,
Received or None..
Template Name: Name of a locally configured peer policy template.
Update Source: Allowed interface for TCP connections to the neighbor.