Quanta Computer QuantaMesh, User Manual

Page: 761 / 1020

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 761
6.9.2.9 ip vrrp track interface
This command alters the priority of the VRRP router based on the availability of its interfaces. This
command is useful for tracking interfaces that are not configured for VRRP. Only IP interfaces are
tracked. A tracked interface is up if the IP on that interface is up. Otherwise, the tracked interface is
down.
When the tracked interface is down or the interface has been removed from the router, the priority of the
VRRP router will be decremented by the value specified in the decrement argument. When the interface
is up for IP protocol, the priority will be incremented by the decrement value.
A VRRP configured interface can track more than one interface. When a tracked interface goes down,
then the priority of the router will be decreased by 10 (the default priority decrement) for each downed
interface. The default priority decrement is changed using the decrement argument. The default priority
of the virtual router is 100, and the default decrement priority is 10. By default, no interfaces are tracked.
If you specify just the interface to be tracked, without giving the optional priority, then the default priority
will be set. The default priority decrement is 10.
Syntax
ip vrrp <1-255> track interface {<slot/port> | vlan <vlan-id>} [decrement <1-254>]
no ip vrrp <1-255> track interface {<slot/port> | vlan <vlan-id>} [decrement]
<1-255> - The range of virtual router ID is 1 to 255.
< 1-254 > - The range of decrement is 1 to 254.
<vlan-id> - VLAN ID. The range of VLAN ID is 1 to 4093.
<no> - This command removes the interface from the tracked list or to restore the priority decrement
to its default.
Default Setting
Decrement: 10
Command Mode
Interface Config