Quanta Computer QuantaMesh, User Manual

Page: 536 / 1020

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 536
5.20.2.2 no class-map
This command eliminates an existing DiffServ class.
Syntax
no class-map <class-map-name>
<class-map-name> is the name of an existing DiffServ class.
The class name 'default' is reserved and is not allowed here. This command may be
issued at any time; if the class is currently referenced by one or more policies or by any
other class, this deletion attempt shall fail.
Command Mode
Global Config
5.20.2.3 class-map rename
This command changes the name of a DiffServ class.
Syntax
class-map rename <new-class-map-name>
<new-class-map-name> is a case-sensitive alphanumeric string from 1 to 31 characters uniquely
identifying the class.
The class name ‘default’ is reserved and must not be used here.
Default Setting
None
Command Mode
Class-Map Config / Ipv6-Class-Map Config
!
!