Quanta Computer QuantaMesh, User Manual

Page: 230 / 1020

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 230
5.3.5.14 snmp-server group
This command creates an SNMP access group.
Syntax
snmp-server group <group-name> [v1 | v2 | v3] {[read <readview>] | [write <writeview>] | [context
<contextprefix>] | [notify <notifyview>]}
<group-name> - The group name to be used when configuring communities or users. The range is
1 to 30 characters.
v1 - This group can only access via SNMPv1.
v2 - This group can only access via SNMPv2c.
v3 - This group can only access via SNMPv3.
<readview> - The view this group will use during GET requests. The range is 1 to 30 characters.
<writeview> - The view this group will use during SET requests. The range is 1 to 30 characters.
<contextprefix> - The SNMPv3 context used during access. Applicable only if SNMPv3 is selected.
<notifyview> - The view this group will use when sending out traps. The range is 1 to 30 characters.
no - This command removes the specified group.
Default Setting
Generic groups are created for all versions and privileges using the default views.
Command Mode
Global Config
5.3.5.15 show snmp views
This command displays the currently configured views.
Syntax
show snmp views [<viewname>]
Default Setting
None
Command Mode
Privileged Exec
Display Message