Q24
Tape
Library
Installation
and
Operations
Manual
© Copyright QUALSTAR 2014
63
4.4
Emergency
release
If
you
cannot
remove
the
magazines
via
the
OCP
or
RMU,
do
the
following:
1.
Press the power button on the front bezel to power down the library.
2.
Unplug the power cord from the library.
3.
From the rear panel of the library, find the access holes for the right and left magazines.
1
‐
Access
hole
for
the
right
magazine
2
‐
Access
hole
for
the
left
magazine
Figure
60
Rear
panel
(access
holes)
4.
Push the end of a small metal pin or straightened paper clip into the magazine access hole at the
back of the device. While holding the pin or clip, have a second person attempt to pull the
magazine out of the front of the unit.
Figure
61
Front
panel
(magazine
removal)
5.
If necessary, repeat the steps 3 and 4 for the other magazine.
6.
If you are unable to remove any tape cartridges or to release the magazines by any of the foregoing
methods, contact your service person.