background image

9

Quadra-Fire  •  TOPAZ-MBK-IPI, TOPAZD-PMH-IPI, TOPAZD-MBK-IPI, TOPAZD-CSB-IPI Owner’s Manual  •  2341-981_R4 •  10/15

E.  Lighting Instructions (IPI)

LIGHTING INSTRUCTIONS (IPI)

TO TURN OFF GAS TO APPLIANCE

FOR YOUR SAFETY READ BEFORE LIGHTING

DANGER

!

1.  This appliance is equipped with an ignition device which automatically 

lights the burner. 

DO NOT

 try to light the burner by hand.

WARNING: 

If you do not follow these instructions exactly, a fire or explosion 

may result causing property damage, personal injury or loss of life.

For additional information on operating your

 Hearth & Home Technologies stove, please refer to www.fireplaces.com.

A.  This appliance is equipped with an intermittent pilot ignition (IPI) device 

which automatically lights the burner. 

DO NOT

 try to light the burner by 

hand.

B. 

BEFORE LIGHTING

, smell all around the appliance area for gas. Be sure to 

smell next to the floor because some gas is heavier than air and will settle on 

the floor.

WHAT TO DO IF YOU SMELL GAS

•  

DO NOT

 try to light any appliance.

• 

DO NOT

 touch any electric switch; do not use any phone in your building.

NOT FOR USE WITH SOLID FUEL

CAUTION:

WARNING:

DO NOT CONNECT LINE VOLTAGE (110/120 VAC OR 220/240 VAC) TO 

THE CONTROL VALVE.

Improper installation, adjustment, alteration, service or maintenance can 

cause injury or property damage. Refer to the owner’s information manual 

provided with this appliance.

This appliance needs fresh air for safe operation and must be installed so 

there are provisions for adequate combustion and ventilation air.

If not installed, operated, and maintained in accordance with the manufacturer’s 

instructions, this product could expose you to substances in fuel or fuel 

combustion which are known to the State of California to cause cancer, birth 

defects, or other reproductive harm.

Keep burner and control compartment clean. See installation and operating 

instructions accompanying appliance.

Hot while in operation. 

DO NOT

 touch. Keep children, clothing, furniture, gasoline 

and other liquids having flammable vapors away.

DO NOT

 operate the appliance with 

fixed glass assembly

 removed, cracked or 

broken. Replacement of the 

fixed glass assembly

 should be done by a licensed 

or qualified service person.

For use with natural gas and propane. A conversion kit, as supplied by the 

manufacturer, shall be used to convert this appliance to the alternate fuel.

Also Certified for Installation in a Bedroom or a Bedsitting Room.

For  assistance  or  additional  information,  consult  a  qualified  installer,  service 

agency or the gas supplier.

1.  Equipped with wall switch: Turn ON/OFF switch to OFF.

  Equipped with remote or wall control: Press OFF button.

  Equipped with thermostat: Set temperature to lowest setting.

593-913i

GAS

VALVE

•   Immediately call your gas supplier from a neighbor’s phone. Follow the gas 

supplier’s instructions.

•   If you cannot reach your gas supplier, call the fire department.

C.  Use only your hand to push in or turn the gas control knob. Never use Tools. If 

the knob will not push in or turn by hand, 

DO NOT

 try to repair it, call a qualified 

service technician. Force or attempted repair may result in a fire or explosion.

D. 

DO NOT

 use this appliance if any part has been under water. Immediately call 

a qualified service technician to inspect the appliance and to replace any part 

of the control system and any gas control which has been under water.

2.  Wait five (5) minutes to clear out any gas. Then smell for gas, including near the 

floor. If you smell gas, STOP! Follow “B” in the Safety Information located on the 

left side of this label. If you do not smell gas, go to next step.

3.  To light the burner: 

  Equipped with wall switch: Turn ON/OFF switch to ON.

  Equipped with remote or wall control: Press ON or FLAME button.

  Equipped with thermostat: Set temperature to desired setting. 
4.  If the appliance does not light after three tries, call your service technician or gas 

supplier.

2.  Service technician should turn off electric power to the control when performing 

service.

HOT GLASS 

WILL CAUSE BURNS.

DO NOT

 TOUCH GLASS UNTIL COOLED.

NEVER

 ALLOW CHILDREN TO TOUCH GLASS.

A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this 

appliance and shall be installed for the protection of children and other at-risk individuals.

Summary of Contents for TOPAZ-MBK-IPI



























Reviews: