13
Quadra-Fire • TOPAZ-MBK-IPI, TOPAZD-PMH-IPI, TOPAZD-MBK-IPI, TOPAZD-CSB-IPI Owner’s Manual • 2341-981_R4 • 10/15
B. Maintenance Tasks - Homeowner
The following tasks may be performed annually by the
homeowner. If you are uncomfortable performing any
of the listed tasks, please call your dealer for a service
appointment.
More frequent cleaning may be required due to lint from
carpeting or other factors. Control compartment, burner and
circulating air passageway of the stove must be kept clean.
CAUTION! Risk of Burns!
The stove should be turned off
and cooled before servicing.
Glass Cleaning
Frequency:
Seasonally
By:
Homeowner
Tools Needed
: Protective gloves, glass cleaner, drop cloth
and a stable work surface.
CAUTION!
Handle fixed glass assembly with care.
Any safety screen or guard removed for servicing must be
replaced prior to operating the stove.
Installation and repair should be done by a qualified service
technician only. The stove should be inspected before use and
at least annually by a professional service person.
4
Maintenance and Service
Task
Frequency
To be completed by
Glass Cleaning
Seasonally
Homeowner
Remote Control
Seasonally
Venting
Seasonally
Gasket Seal
and Glass
Inspection
Annually
Qualified Service
Technician
Log Inspection
Annually
Firebox
Inspection
Annually
Control
Compartment &
firebox Top
Annually
Burner Ignition
& Operation
Annually
When properly maintained, your stove will give you many
years of trouble-free service.
Contact your dealer
to answer
questions regarding proper operation, troubleshooting and
service for your appliance. Visit www.heatnglo.com to locate
a dealer. We recommend annual service by a qualified
service technician.
A. Maintenance: Frequency and Tasks
Figure 4.1 Remove Casting
TOP CASTING
FRONT CASTING
SAFETY BARRIER
Figure 4.2 Remove Glass Frame
PHILLIPS SCREWS
GLASS IS BREAKABLE.
• Avoid striking, scratching or slamming glass.
• Avoid abrasive cleaners.
•
DO NOT
clean glass while it is hot.
•
Prepare a work area large enough to accommodate fixed
glass assembly and door frame by placing a drop cloth on
a flat, stable surface.
Note
: Fixed glass assembly and gasketing may have
residue that can stain carpeting or floor surfaces.
• Remove safety barrier
• Remove front casting by loosening thumb screw at bottom
of casting. Slide bottom of casting away from appliance.
CAUTION! Risk of Injury!
Casting is very heavy. Handle
with care.
See Figure 4.1. Set front casting aside on prepared work
surface.
• Remove glass from appliance. Figure 4.2.
• Using a #2 Phillips bit, remove three fasteners from the top
of the glass frame assembly.
