quadient HD-MB50D User Manual Download Page 13

Page: 13 / 108

Guide to Names and Functions of Components

• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal

components.

Front and left view

DUL005

Auxiliary Tray on the Paper Reversal Location

Pull this tray

when duplex printing

on paper larger than A4 or

81/2 × 11.

Paper Reversal Location

This area is used to reverse pages that are

duplexed (

printed on both sides

)

Control panel

See page 19 "Guide to the Names and Functions of the Machine's Control Panel".

Main power switch

To operate the machine, the main power switch must be on. If it is off, open the main

power switch's cover and turn the switch on.

Front cover

Open to access the inside of the machine.

Paper trays (Trays 1–2)

Load paper here. For details, see page 43 "Loading Paper".

Optional -

Lower paper trays

(Trays 3-4) HD-MB50-HCTRAY

Load paper here. For details, see page 43 "Loading Paper".

Vents

Prevent overheating.

Internal tray 1

Printed paper are delivered here.

Guide to Names and Functions of Components

Summary of Contents for HD-MB50D













































































































Search results

Summary of Contents for HD-MB50D

Reviews:

Related manuals for HD-MB50D

Brands by name

Popular brands

quadient HD-MB50D, User Manual

Search results

Summary of Contents for HD-MB50D

Reviews:

Related manuals for HD-MB50D

Brands by name

Popular brands