Page
44
AN-X-TI-MAS
November 2011
Both MAC address and IP address must match the settings on the AN-X
in order for communication to occur.
Click OK to select the AN-X.
The title bar of AnxInit shows the MAC Address and IP Address of the
currently selected AN-X.
Set AN-X IP Configuration
The AN-X must be on the local Ethernet to set its IP address.
First select the AN-X using the
Utilities/Select An AN-X
command
.
Next select
Utilities/AN-X IP Configuration.
The
AN-X TCP/IP
Configuration
dialog appears.
Enter a
Host Name
for the AN-X. AN-X uses the host name to create
ControlLogix tags, so give the AN-X a meaningful host name. This name
is used internally by AN-X and may be used to identify the AN-X if you
have a DNS server on your network. The name can be from 1 to 31
characters long.
To configure the AN-X to obtain its IP address from a DHCP server on
the network, select
Obtain an IP address automatically (DHCP)
To configure the AN-X to use a static IP address, select
Use the
following Settings
and enter the following:
•
the desired IP address for the AN-X.
