AN-X-TI-MAS Page
11
The preferred method is to cycle power on the AN-X. Select the first
option on the screen and click the
Next >>
button.
An alternative method, useful if the AN-X in not easily accessible, is to
send it a command over Ethernet. The AN-X must be powered on and
completely running for this method to work. For example, if this is the
first time you are configuring a new AN-X, allow sufficient time for it to
acquire an IP address from a DHCP server or to time out and use its
default IP address (about 3 minutes). Select the second option on the
screen and click the
Next >>
button.
Step 3:
Wait for AN-X to enter boot mode. While AnxInit is waiting, the
Next>>
button is disabled. When AN-X is in boot mode, the
Next>>
button is enabled.
