QTech QSW-2800 series, Configuration Manual

Page: 226 / 415

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
212
ip dhcp relay information option remote-id
format {default | vs-hp}
Set remote-id format of Relay Agent option82.
5. Configure delimiter
Command Explanation
Global mode
ip dhcp relay information option delimiter
[colon | dot | slash | space]
no ip dhcp relay information option
delimiter
Set the delimiter of each parameter for
suboption of option82 in global mode, no
command restores the delimiter as slash.
6. Configure creation method of option82
Command Explanation
Global mode
ip dhcp relay information option self-
defined remote-id {hostname | mac | string
WORD}
no ip dhcp relay information option self-
defined remote-id
Set creation method for option82, users can
define the parameters of remote-id suboption
by themselves
ip dhcp relay information option self-
defined remote-id format [ascii | hex]
Set self-defined format of remote-id for relay
option82.
ip dhcp relay information option self-
defined subscriber-id {vlan | port | id
(switch-id (mac | hostname)| remote-mac)|
string WORD }
no ip dhcp relay information option self-
defined subscriber-id
Set creation method for option82, users can
define the parameters of circute-id suboption
by themselves
ip dhcp relay information option self-
defined subscriber-id format [ascii | hex]
Set self-defined format of circuit-id for relay
option82.
7. Diagnose and maintain DHCP option 82
Command Explanation
Admin mode
show ip dhcp relay information option
This command will display the state
information of the DHCP option 82 in the
system, including option82 enabling switch,
the interface retransmitting policy, the circuit
ID mode and the DHCP server option82
enabling switch.