QTech QSW-2800 series, Configuration Manual

Page: 200 / 415

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
186
Chapter 26 Gratuitous ARP Configuration
26.1 Introduction to Gratuitous
ARP
Gratuitous ARP is a kind of ARP request that is sent by the host with its IP address as the
destination of the ARP request.
The basic working mode for the switch is as below: The Layer 3 interfaces of the switch can be
configured to advertise gratuitous ARP packets period or the switch can be configured to
enable to send gratuitous ARP packets in all the interfaces globally.
The purpose of gratuitous ARP is as below:
To reduce the frequency that the host sends ARP request to the switch. The hosts in the
network will periodically send ARP requests to the gateway to update the MAC address of the
gateway. If the switch advertises gratuitous ARP requests, the host will not have to send these
requests. This will reduce the frequency the hosts’ sending ARP requests for the gateway’s
MAC address.
Gratuitous ARP is a method to prevent ARP cheating. The switch’s advertising gratuitous ARP
request will force the hosts to update its ARP table cache. Thus, forged ARP of gateway
cannot function.
26.2 Gratuitous ARP Configuration
Task List
Enable gratuitous ARP and configure the interval to send gratuitous ARP request
Display configurations about gratuitous ARP
1. Enable gratuitous ARP and configure the interval to send gratuitous ARP request.
Command Explanation
Global Configuration Mode and Interface Configuration Mode.
ip gratuitous-arp < 5-1200 >
no ip gratuitous-arp
To enable gratuitous ARP and configure the
interval to send gratuitous ARP request.
The no command cancels the gratuitous ARP.
2. Display configurations about gratuitous ARP
Command Explanation