QTech QSW-2800 series, Configuration Manual

Page: 84 / 415

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
70
4. Set load-balance method for Port-group
5. Set the system priority of LACP protocol
6. Set the port priority of the current port in LACP protocol
7. Set the timeout mode of the current port in LACP protocol
1. Creating a port group
2. Add physical ports to the port group
3. Enter port-channel configuration mode.
Command Explanation
Global Mode
interface port-channel <port-channel-
number>
Enter port-channel configuration mode.
4. Set load-balance method for port-group
5. Set the system priority of LACP protocol
Command Explanation
Global Mode
port-group <port-group-number>
no port-group <port-group-number>
Create or delete a port group.
Command Explanation
Port Mode
port-group <port-group-number> mode
{active | passive | on}
no port-group
Add the ports to the port group and set their
mode.
Command Explanation
Aggregation port configuration mode
load-balance {src-mac | dst-mac | dst-src-
mac | src-ip | dst-ip | dst-src-ip}
Set load-balance for port-group.
Command Explanation
Global mode
lacp system-priority < system-priority >
no lacp system-priority
Set the system priority of LACP protocol, the
no command restores the default value.