+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
25
[access {
<num-std>
|
<name>
}] [ipv6-access
{
<ipv6-num-std>
|
<ipv6-name>
}]
no snmp-server user <user-string> [access
{<num-std>|<name>}] [ipv6-access {<ipv6-num-
std>|<ipv6-name>}]
for SNMP v3.
6. Configure group
Command
Explanation
Global Mode
snmp-server group
<group-string>
{noauthnopriv|authnopriv|authpriv} [[read
<read-
string>
] [write
<write-string>
] [notify
<notify-
string>
]] [access {
<num-std>
|
<name>
}] [ipv6-
access {
<ipv6-num-std>
|
<ipv6-name>
}]
no snmp-server group
<group-string>
{noauthnopriv|authnopriv|authpriv} [access
{
<num-std>
|
<name>
}] [ipv6-access {
<ipv6-num-
std>
|
<ipv6-name>
}]
Set the group information on the
switch. This command is used to
configure VACM for SNMP v3.
7. Configure view
Command
Explanation
Global Mode
snmp-server view
<view-string> <oid-string>
{include|exclude}
no snmp-server view <view-string> [<oid-string>]
Configure view on the switch. This
command is used for SNMP v3.
8. Configuring TRAP
Command
Explanation
Global Mode
snmp-server enable traps
no snmp-server enable traps
Enable the switch to send Trap
message. This command is used for
SNMP v1/v2/v3.
snmp-server host { <host-ipv4-address> | <host-
ipv6-address>
} {v1 | v2c | {v3 {noauthnopriv |
authnopriv | authpriv}}}
<user-string>
no snmp-server host
{
<host-ipv4-address> |
<host-ipv6-address> } {v1 | v2c | {v3
{noauthnopriv
|
authnopriv | authpriv}}}
<user-
string>
Set the host IPv4/IPv6 address
which is used to receive SNMP Trap
information. For SNMP v1/v2, this
command also configures Trap
community string; for SNMP v3, this
command also configures Trap user
name and securi
ty level. The “no”
Summary of Contents for QSW-2800 series
Page 189: ...7 495 797 3311 www qtech ru 18 1 175...
