QTech QSW-2800 series, Configuration Manual

Page: 56 / 415

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
42
3. Configure attributes of the cluster in the commander switch
4. Configure attributes of the cluster in the candidate switch
5. Remote cluster network management
mac-address < mac-addr> }
Command Explanation
Global Mode
cluster auto-add
no cluster auto-add
Enable or disable adding newly discovered
candidate switch to the cluster.
cluster member auto-to-user
Change automatically added members into
manually added ones.
cluster keepalive interval <second >
no cluster keepalive interval
Set the keep-alive interval of the cluster.
cluster keepalive loss-count < int>
no cluster keepalive loss-count
Set the max number of lost keep-alive
messages that can be tolerated in the cluster.
Admin mode
clear cluster nodes [nodes-sn
< candidate-sn-list> | mac-address
<mac-addr >]
Clear nodes in the list of candidate switches
maintained by the switch.
Command Explanation
Global Mode
cluster keepalive interval < second>
no cluster keepalive interval
Set the keep-alive interval of the cluster.
cluster keepalive loss-count < int>
no cluster keepalive loss-count
Set the max number of lost keep-alive
messages that can be tolerated in the clusters.
Command Explanation
Admin Mode
rcommand member < member-id>
In the commander switch, this command is
used to configure and manage member
switches.
rcommand commander
In the member switch, this command is used to
configure the commander switch.
cluster reset member [id <member-id> |
mac-address <mac-addr> ]
In the commander switch, this command is
used to reset the member switch.
cluster update member <member-id> In the commander switch, this command is