QTech QSW-2800 series, Configuration Manual

Page: 399 / 415

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
385
2. To configure NTP server function
Command Explication
Global Mode
ntp server {<ip-address> | <ipv6-address>}
[version <version_no>] [key <key-id>]
no ntp server {<ip-address> | <ipv6-
address>}
To enable the specified time server of time
source.
3. To configure the max number of broadcast or multicast servers supported by the NTP client
Command Explication
Global Mode
ntp broadcast server count <number>
no ntp broadcast server count
Set the max number of broadcast or multicast
servers supported by the NTP client. The no
operation will cancel the configuration and
restore the default value.
4. To configure time zone
Command Explication
Global Mode
clock timezone WORD {add | subtract} <0-
23> [<0-59>]
no clock timezone WORD
This command configures timezone in global
mode, the no command deletes the
configured timezone.
5. To configure NTP access control list
Command Explication
Global Mode
ntp access-group server < acl>
no ntp access-group server < acl >
To configure NTP server access control list.
6. To configure NTP authentication
Command Explication
Global Mode
ntp authenticate
no ntp authenticate
To enable NTP authentication function.
ntp authentication-key < key-id> md5
< value >
To configure authentication key for NTP
authentication.