88
“Reset to factory default”
allows user to reset subsystem to factory default setting.
Figure 4.6.5.1
Reset to default value, the password is:
1234
, and IP address to default DHCP.
Default IP address:
192.168.10.50
(DHCP)
Default subnet mask:
255.255.255.0
Default gateway:
192.168.10.254
4.6.6
Import and export
“Import and export”
allows user to save system configuration values: export, and apply
all configuration: import. For the volume configuration setting, the values are available in
export and not available in import which can avoid confliction / date-deleting between two
subsystems which mean if one system already has valuable volumes in the disks and user
may forget and overwrite it. Use import could return to original configuration. If the
volume setting was also imported, user’s current volumes will be overwritten with different
configuration.
Figure 4.6.6.1
1.
Import:
Import all system configurations excluding volume configuration.
2.
Export:
Export all configurations to a file.
Caution
“Import”
will import all system configurations excluding volume
configuration; the current configurations will be replaced.
4.6.7
Reboot and shutdown
Summary of Contents for P300H61
