50
For example, LAN1 and LAN2 are set as Trunking mode. LAN3 and LAN4 are set as LACP
mode. To remove Trunking / LACP setting, check the gray button of LAN port, click
“Delete link aggregation”
. Then it will pop up a message to confirm.
•
Ping host:
User can ping the corresponding host data port from the target, click
“Ping host”
.
Figure 4.3.1.5
(Figure 4.3.1.5 shows a user can ping host from the target to make sure the data port
connection is well.)
4.3.2
Entity property
“Entity property”
can view the entity name of the system, and setup
“iSNS IP”
for
iSNS (Internet Storage Name Service). iSNS protocol allows automated discovery,
management and configuration of iSCSI devices on a TCP/IP network. Using iSNS, it needs
to install an iSNS server in SAN. Add an iSNS server IP address into iSNS server lists in
order that iSCSI initiator service can send queries. The entity name can be changed.
Summary of Contents for P300H61
