26
Figure 2.5.1
1.
Setup the hardware connection before power on servers. Connect console cable,
management port cable, and iSCSI data port cables in advance.
2.
In addition, installing an iSNS server is recommended for dual controller system.
3.
Power on
P300H61 / P300H71
and
J300H61 / J300H71
(optional) first, and
then power on hosts and iSNS server.
4.
Host server is suggested to logon the target twice (both controller 1 and controller 2),
and then MPIO should be setup automatically.
Tips
iSNS server is recommended for dual controller system.
For better data service availability, all the connections among host servers, GbE switches,
and the dual controllers are recommended as redundant as below.
Summary of Contents for P300H61
