Qsan Technology P300H61 User Manual Download Page 34

Page: 34 / 154

controller alive and well.

Return to home page.

Logout the management web UI.

Mute alarm beeper.

Tips

If the status indicators in Internet Explorer (IE) are displayed in gray, but
not in blinking red, please enable

“Internet Options”

“Advanced”

“Play animations in webpages”

options in IE. The default value is

enabled, but some applications will disable it.

3.2

How to use the system quickly

The following methods will describe the quick guide to use this subsystem.

3.2.1

Quick installation

Please make sure that there are some free drives installed in this system. SAS drivers are
recommended. Please check the hard drive details in

“/ Volume configuration /

Physical disk”

Figure 3.2.1.1

Step1:

Click the

“Quick installation”

menu item; follow the steps to set up system

name and date / time.

Summary of Contents for P300H61



























































































































































Search results

Summary of Contents for P300H61

Reviews:

Related manuals for P300H61

Brands by name

Popular brands

Qsan Technology P300H61, User Manual

Search results

Summary of Contents for P300H61

Reviews:

Related manuals for P300H61

Brands by name

Popular brands