73
4.4.6
Example
The following is an example to create volumes. This example is to create two VDs and set
a global spare disk.
•
Example
This example is to create two VDs in one RG, each VD shares the cache volume. The
cache volume is created after system boots up automatically. Then set a global spare disk.
Last, delete all of them.
Step 1:
Create a RG (RAID group).
To create a RAID group, please follow the procedures:
Figure 4.4.6.1
1.
Select
“/ Volume configuration / RAID group”
.
2.
Click
“Create“
.
3.
Input a RG Name, choose a RAID level from the list, click
“Select PD“
to choose the
RAID physical disks, then click
“OK“
.
4.
Check the setting. Click
“OK“
if all setups are correct.
5.
Done. A RG has been created.
Summary of Contents for P300H61
