QMS Magicolor, User Manual

Page: 98 / 446

The Control Panel icon is usually located in Program
Manager’s Main window.
5. In the Printers dialog box, in the Installed Printers list, remove
all existing PostScript printers using the following procedure:
a. Select a PostScript printer in the Installed Printers list and choose
the Remove button.
b. Choose Yes in the message box that appears.
c. Repeat steps a and b until all PostScript printers are removed.
6. In the Printers dialog box, choose the Add button.
7. From the List of Printers that appears, choose Install Unlisted
or Updated Printer and choose the Install button.
8. In the text box that appears, type the name of the floppy drive
(for example,
A:\
) the Windows disk is in and choose OK.
9. In the Add Unlisted or Updated Printer dialog box, select
“QMS PostScript Printer” and choose OK.
If you see the following message: "Insert Microsoft Windows
3.1 Disk #5 or a disk with the updated SSERIFF.FON file
in...," choose the Cancel button.
10. Choose the Connect button to configure your printer port.
11. In the Connect dialog box, select the appropriate host port in
the Ports list and choose OK.
12. Choose the Setup button, and in the Printers section of the
dialog box that appears, choose your printer (either magicolor
or magicolor Plus).
13. Choose OK to return to the Printers dialog box.
14. Choose Set As Default Printer to make the QMS printer the
default printer.
Chapter 3
3 - 1 4 C o n n e c t i n g t h e P r i n t e r