QMS Magicolor, User Manual

Page: 214 / 446

oil-proof container, such as a plastic bag, until you are ready
to reinstall it after the move.
NOTE: Normally, a little oil remains in the tray in which the
oil bottle rests. If oil accidentally spills beyond this tray into
the printer, use a clean, dry, lint-free cloth or some cotton
swabs to wipe up the excess.
6. Close the oil bottle retainer.
7. Grasp the fuser unit by the two handles, one at each end (fig.
6.6), and lift it up and out of the printer.
Fig. 6.6 Remove the Fuser Unit
Chapter 6
6 - 2 0 C o n s u m a b l e s a n d P r e v e n t a t i v e M a i n t e n a n c e