QMS Magicolor, User Manual

Page: 308 / 446

4. Press the Select key to enter the Format Disk submenu. Then
press the Next key until the following message appears in the
message window:
FORMAT DISK
DISK 6
5. Disk 6 is the printer’s internal hard disk. Press the Select key.
The following message displays:
FORMAT
ARE YOU SURE?
NOTE: If you decide not to format the internal hard disk,
press the Menu key to back out of the submenus. When you
reach the top level, you can use the Next or Previous key to
select the menu you want.
6. Press the Select key to begin formatting. The message window
displays:
FORMAT DISK
FORMATTING
Then when formatting is finished, the message window
displays:
FORMAT DISK
COMPLETED
7. Press the Menu key until the following message appears:
QMS SOFTLOAD x.x
INSTALL TO DISK
8. Go to the next section for information on reinstalling the
system software and fonts.
Chapter 8
8 - 5 0 P r i n t e r O p t i o n s