QMS Magicolor 2 Desklaser, User Manual

Page: 82 / 276

$1
..#
/
)(""
Caution: Although the QMS magicolor 2 DeskLaser was designed for occasional
printing on a wide range of media types, it is not intended to print exclusively on a
single media type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, glossy stock, labels, thick stock, transfer media, or
transparencies) may adversely affect print quality or reduce engine life.
-*
1 In the printer driver (Paper tab, Paper Type option),
select Standard.
2 Remove the media cassette from the printer (and
remove any media in the cassette).
3 Load the new media.
» Note:
Load the media printing-side up (1-sided
printing) or printing-side down (2-sided printing) with
the top of the media (the letterhead or memo
information) toward the back of the cassette.
Formatting Your printer receives the instructions to print on envelopes from your
application.
When formatting data for envelopes, leave at least a 0.16" (4.06 mm) mar-
gin from the edges of the envelope.
Print on the front side only. Some parts of the envelope consist of three
layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
See your application documentation for specific information on printing
envelopes.