QMS Magicolor 2 Desklaser, User Manual

Page: 195 / 276

&
$
$ -
....
This service message... means...
Call for service
C3 NVRAM error
An error has been detected with the
item indicated in the service
message. Correction of these errors
is performed by qualified service
personnel only. Contact your local
vendor.
» Note:
A service message
sometimes occurs as a result of
an unusual combination of events,
not because of an actual problem.
When the printer stops and a
service message displays in the
message window, turn the printer
off and then back on. This often
clears the service message
indicator, and printer operation
resumes. Always try this before
making a service call.
Service calls should be placed to the
vendor from whom you purchased the
printer. If you cannot get service from
your vendor, see appendix A, “QMS
Customer Support,” for more
information.
Call for service
C4 engine ctrl.
Call for service
C7 timing clock
Call for service
D1 YW clutch
Call for service
D2 MG clutch
Call for service
D3 CY clutch
Call for service
D4 BK clutch
Call for service
D5 YK solenoid
Call for service
D6 MC solenoid
Call for service E1
DE devlpr. motor
Call for service
E2 main motor
Call for service
E3 drum error
Call for service
E4 toner empty
Call for service
E5 roller solnd.