QMS Magicolor 2 Desklaser, User Manual

Page: 123 / 276

$
"
.1# '+
Typically, most files print with the 8 MB of memory that comes standard on your QMS
magicolor 2 DeskLaser and 32 MB on the DeskLaser duplex model. However, some
files may exceed this amount. If the printer doesn’t have enough memory, a
Print-
ing need more memory
message displays in the printer’s message window.
.
Caution:
It's very important to protect the printer controller board and SIMM from
electrostatic damage. Before performing this procedure, review the antistatic caution
in “Antistatic Protection” on page 5-8.
Always handle circuit boards by the edges only.
1 Turn off the printer, and then disconnect the power cord and all interface
cables from the printer.