QMS 2060, Reference

Page: 69 / 210

(PXODWLRQV
3ULQWHU&RQILJXUDWLRQ
6HWWLQJ3&/H3DUDPHWHUV
The PCL 5e menu maintains PCL 5e emulation attributes such as
default font, symbol set, and point size. There are ten configuration
settings. See appendix C, “Document Option Commands,” for a
list of supported PCL 5e emulation DOCs.
'HIDXOW)RQW
Sets the printer’s default PCL 5E font.
Menu Administration/Emulations/PCL5E/Default Font
Choices Courier12, Courier12bold, Courier12italic, Courier10,
Courier10bold, Courier10italic, Lineprinter, Times*,
Times*Italic, Times*Bold, Times*BldItalic, Univ*, Univ*Italic,
Univ*Bold, Univ*BldItalic, Univcond*, Univcond*Italic,
Univcond*Bold, Univcond*BldItlc,
Select By Index
Default Courier12
Notes Fonts with an asterisk “*” in their names are scalable. Their
default point size is set by the Point Size X100 option.
Choosing Select by Index as the default font selects the font by
the index number printed on the advanced status page and is
set through the Default Font Idx option.
»Note:
You must use the select by index value to select an
Intellifont.
Lineprinter is a bitmap font with a fixed point size. Selecting a
bound, bitmap font overrides the default settings for symbol set
and point size. An unbound font uses the specified default
symbol set if possible, and a scalable font uses the default font
size.