QMS 2060, Reference

Page: 78 / 210

(PXODWLRQV
4063ULQW6\VWHP5HIHUHQFH
3ORWWHU
Identifies the HP-GL plotter type.
6FDOLQJ3HUFHQW
Identifies the percentage to reduce or enlarge an image.
» Note: To scale plots, select the paper size originally used for the plot
in the Paper Type menu and then enter the reduction or enlargement
needed to fit the plot on the new page in the Scaling Percent menu.
Menu Administration/Emulations/HPGL/Plotter
Choices 7475A—
7470A—
Colorpro—
7550A—
DraftMaster—Supports architectural and engineering paper
sizes (for example, A to E and Arch A to Arch E). These paper
sizes describe a mapping to the physical paper. This mapping
is a scaling factor (or a size ratio) between the chosen paper
size and the physical paper size in the default inputbin. For
example if A3 is selected (size 11.69'' x 16.54'') for paper size
and the physical paper size in the default inputbin is A4 (8.27''
x 11.69''), then the plot is scaled by a factor of 2.
Default 7550A
Menu Administration/Emulations/HPGL/Scaling Percent
Choices 001-150 (1-150%)
Default 100 (100%)