QMS 2060, Reference

Page: 64 / 210

&RPPXQLFDWLRQV
4063ULQW6\VWHP5HIHUHQFH
0RGH
The parallel interface supports Centronics parallel communication as
well as IEEE 1284 bidirectional parallel communication.
(PXODWLRQ
Sets the parallel interface emulation.
0LQLPXP1XPEHURI.LORE\WHVIRU6SRROLQJ
Sets the minimum number of kilobytes of system memory allocated to
the parallel interface.
Menu Administration/Communications/Parallel/Mode
Choices Interactive—Establish two-way communication between the
host and the printer.
Noninteractive—Establish one-way communication from the
host to the printer.
Disabled—Turn off parallel communication with the host. The
printer stops accepting print jobs over the parallel interface.
Default Noninteractive
Notes The printer must be restarted for changes to the menu to take
effect. You can either let the printer restart automatically after
you save the change and exit from the Configuration menu, or
you can wait for the change to take effect the next time you
manually turn on the printer. See chapter 5, “Additional
Technical Information,” for a discussion of the different modes.
Menu Administration/Communications/Parallel/Emulation
Choices ESP, Hexdump, PostScript, PCL5e, HPGL, Lineprinter
»Note:
Other optional emulations may also appear, if
installed.
Default ESP
Menu Administration/Communications/Parallel/Min K Spool
Choices 00000-99999
Default 00015