QMS 2060, Reference

Page: 96 / 210

Engine
QMS 2060 Print System Reference 4-60
Duplex H. Offset
Duplex V. Offset
Setting the Rotate Simplex Option
This option rotates the image so that it prints correctly on 3-hole
punched paper.
» Note: You must insert the paper with the holes on the leading edge of
the paper. If installed the opposite way, you will get an error message.
Setting Default Paper
Default Paper is used when the default media is requested but the
default input bin is missing from the engine, there’s no way to sense
the media size automatically.
Menu Administration/Engine/Image Alignment/Duplex H. Offset
Choices 000-300 (0.00"/0 mm-1.00"/25.4 mm)
Default 100 (0.33"/.84 mm)
Notes Values above 100 move the image to the right.
Values below 100 move the image to the left.
Menu Administration/Engine/Image Alignment/Duplex V. Offset
Choices 000-300 (0.00"-1.00")
Default 100 (0.33"/.84 mm)
Notes Values above 100 move the image down.
Values below 100 move the image up.
Menu Administration/Engine/Rotate Simplex
Choices Yes
No
Default No
Note This feature allows simplex printing only. You cannot print
duplex on 3-hole punched paper.
Menu Administration/Engine/Default Paper
Choices Letter, A4
Default Letter