QLS 2000/3000 Series Digital Color Printers
Printing
27
Adjusting print offset affects all print stations simultaneously. Adjust Web
Alignment to modify registration at each print station individually.
TO SPECIFY OFFSET:
1. Press the Menu pushbutton to display the Main menu.
2. Use the arrow buttons to move the on-display indicator to Media, then press
Select. The Media menu will be displayed.
3. From the Media menu, use the arrow buttons to position the on-display
indicator before Offset.
4. Press the Select button to move to the next line. Use the arrow keys to set
the print and cut offsets. The print offset will affect the cut offset. As a
rule, the print offset should be set first:
PRINT OFFSET:
Adjust the location of the printed image relative to
the top-of-form sensor mark. Press the up arrow to move the image up the
label (to the right) one pixel at a time; press the down arrow to move the
image down the label (to the left).
CUT OFFSET:
Adjust the location of the cut line in relation to the
image position. Press the up arrow to move the cut line up the label, one
pixel at a time; press the down arrow to move the line down the label. The
cut offset is only valid when the external cutter unit is enabled.
Web Alignment
Alignment is particularly important for process color printing on the QLS-3000.
Adjust Web Alignment to modify registration at each print station individually.
Adjust Print Offset to modify the alignment of all print stations simultaneously.
To evaluate whether web alignment should be adjusted, print a Block Test.
